Gaadhi Silsilad-Silsilado Toosan Ku Xidha-SS812
SS812 Silsilad Toosan
| Nooca Silsiladda | Balaadhka saxanka | Culayska shaqada (Max) | Xoogga ugu dambeeya | Miisaanka | |||
| mm | inji | 304 (kn) | 420 430 (kn) | 304 (min kn) | 420 430 (min kn) | Kg/m | |
| SS812-K325 | 82.6 | 3.25 | 3.2 | 2.5 | 8 | 6.25 | 2.4 |
| SS812-K450 | 114.3 | 4.50 | 3.2 | 2.5 | 8 | 6.25 | 3.2 |
| SS812-K600 | 152.4 | 6.00 | 3.2 | 2.5 | 8 | 6.25 | 4.4 |
| SS812-K750 | 190.5 | 7.50 | 3.2 | 2.5 | 8 | 6.25 | 4.9 |
| Dhererka dhererka: 38.1mm | Dhumucda: 3.0mm | ||||||
| Waxyaabaha: birta aan birta ahayn ee austenitic (aan ahayn magnet);bir bir ah oo bir ah (magnetic)Maaddada Pin: bir aan-qabin | |||||||
| Dhererka qaadaha ugu badan: 15 mitir. | |||||||
| Max.Xawaaraha: saliid 90m / daq;Qallayl 60m/daqiiqo | |||||||
| Xirmada: 10 cagood=3.048 M/sanduuqa 26pcs/m | |||||||
| Codsiga: si ballaaran loo isticmaalo dhammaan noocyada kala duwan ee gudbinta dhalada iyo culeyska culus sida birta.Gaar ahaan lagu dabaqay warshadaha biirka.Soo jeedin: saliid. | |||||||
812 Sprockets Machined
| Mashiinka Sprockets | Ilkaha | Dhexroorka Pitch (PD) | Dhexroor ka baxsan (OD) | Bore Center (d) | ||
| mm | inji | mm | inji | mm | ||
| 1-812-19-25 | 19 | 115.7 | 4.55 | 117 | 4.60 | 25 30 35 |
| 1-812-21-25 | 21 | 127.8 | 5.03 | 129 | 5.07 | 25 30 35 |
| 1-812-23-25 | 23 | 139.9 | 5.50 | 140.7 | 5.53 | 25 30 35 40 |
| 1-812-25-25 | 25 | 152 | 5.98 | 153 | 6.02 | 25 30 35 40 |
| Waxyaabaha: Polyamide PA6 | ||||||
| Dulqaadashada: d: 0.02 ~ 008 | ||||||
812 Duritaan Molded Sprockets
| Duritaan Molded Sprockets | Ilkaha | Dhexroorka Pitch (PD) | Dhexroor ka baxsan (OD) | Bore Center (d) | ||
| mm | inji | mm | inji | mm | ||
| 3-812-19-25 | 19 | 115.7 | 4.55 | 117 | 4.60 | 25 30 35 |
| 3-812-21-25 | 21 | 127.8 | 5.03 | 129 | 5.07 | 25 30 35 |
| 3-812-23-25 | 23 | 139.9 | 5.50 | 140.7 | 5.53 | 25 30 35 40 |
| 3-812-19-25 | 25 | 152 | 5.98 | 153 | 6.02 | 25 30 35 40 |
| Waxyaabaha: La xoojiyay PA6 | ||||||
| Dulqaadashada: d: 0.02 ~ 008 | ||||||
